Resume 3

TO PUT MY EXTENSIVE ENGINEERING SKILLS TO WORK FOR YOU

TARGET JOB: Telecommunications, Medical, Underwater Research and R & D
Target Job Title: Engineering Manager
Alternate Target Job Title: Senior Electrical Engineer

Desired Job Type: Employee, Temporary/Contract/Project
Desired Status: Full-Time
Desired Salary: 95,000.00 USD Per Year
Site Location: On-Site

Job Title: SENIOR ELECTRICAL ENGINEER/TECHNICAL/ENGINEERING MANAGER
Career Level: Management Manager/Director of Staff

Date of Availability: Immediate

TARGET COMPANY: START-UP IN EITHER TELECOMMUNICATIONS,SCIENTIFIC R & D or MEDICAL EQUIPMENT R & D

Company Size: Prefer small
Category: Electrical Engineering

TARGET LOCATIONS: Will Relocate with conditions

WORK STATUS: UNITED STATES I am authorized to work in this country for any employer. Have held Security Clearances.

Valid MASS Drivers License Class 3

MANAGEMENT SKILLS

Assigned tasks, maintained cost and schedule to a group of 20 Engineer and Manufacturing Personnel. Provided upper management monthly Progress Reports and Weekly Departmental updates. Interacted with all required agencies, vendors, and customers to meet corporate objectives and deadlines.

DESIGN ENGINEER

Extensive expertise in the Engineering Process. Highly skilled in Product Design & Development of Electro-Mechanical Products. Participated in providing Technical Engineering Leadership and Support to System, Concept, Equipment, Readiness and Production Review in Transiting "new" Designs into a Solid Product. Developed and Documented Specifications, Concept Definitions, Analyses and Trade Studies of various Electro-Mechanical Systems. Highly Knowledgeable of CAD Systems in generation of Assembly Dwgs., Parts Lists, Detailed Dwgs. Altered Item Dwgs. Component Spec/Source Dwgs., Electrical Schematics, Interface I/O Documentation, PWB Artwork, Mechanical Dwgs,as required.

ELECTRONIC TECHNICIAN

Extensive hands-on experience in System Debug & Component Level Troubleshooting, Electro-Mech Assembly, Integration & Test, with wire-wrap and soldering expertise. Integration and Test of a variety of Computer Hardware.

Providing management assistance to Store Manager. Responsible for opening and closing. Assignment of daily retail task and scheduling of available manpower. Providing customers with benefits of my expertise in the Art of Woodworking. Upgraded and re-merchandise entire store increasing net sales by 30 . Have sold well over 250,000 woodworking tools in 8 months

Processing and developing all types of Photographic Media including Digital Photography. Handing of Customer questions and accountable for cash flow. Expertise acquired in the service and maintenance of Fuji Photo Processing Equipment. Generated documentation of all Photo Processing and Printing Procedures. Adhered to EPA Hazard Waste Requirements.

Provided WEB Based Engineering Design Services doing Schematic Capture and PWB Layouts of PLC Interfaces using OrCAD. Performed various Test Engineering activities. Involved in assessing and performing the overall Functional and In-Circuit Test activities in the production and repair of the DC-40 Handheld 486 Datacomputer w/LCD Display, PCMCIA I/F, Irda I/F, Modem I/F , and associated Power Supply SMD Assembly.

• Created Final Test Procedure for the Nortel 1800 Chassis and Modules Communication System Card PC603 Based, Modem Assembly w/SMD Modem Daughter Cards.
• Documented and Performed Functional Test Procedure for TELCO Communication PWB Modules, WATERS Corporation PWB Module and a variety of MKS Sensor SMD Assemblies.

Electronic Design Laboratory Lead Engineer and Cost Account Manager. Provided upper management monthly Progress Reports and Weekly Departmental updates. Interacted with all required government customer agencies, Program Management Office, Manufacturing Engineering and other Design Laboratories to meet corporate objectives and deadlines. Managed and participated in Electrical Engineering involved in the specifying, designing, development, testing, debugging and qualifying prototype Electronic H/W.

• Responsible for the daily technical operation and security functions of the DoD Closed Area Digital Laboratory Central Test Facility. Upgraded and maintained PATRIOT COMO Simulation Laboratory.
• Technical Integration Lead to an engineering group of 10 engineers, in both hardware and software. Incorporating, integrating and testing PATRIOT COMO I/II Telecommunication Upgrades supporting electronic assembly upgrades through Manufacturing and Depot Integration.
• Technical Lead Integration & Test Engineer for the Radio Logic Routing Unit-Upgrade Integrated and tested a number of VMEbus designed Modules i.e.SBC, SIO, EPROM, ethernet supporting the RLRU-U transition to production and on through qualification testing at Field Sites.
• Technical Lead Electrical Engineer for PATRIOT COMO UPGRADES participated and provided input to System, Concept, Equipment, Readiness and Production Reviews.
• Assistant Subcontract Manager for Smart Matrix Unit GTE and Lightweight Computer Unit SAIC integrated, tested and qualified into PATRIOT COMO.

Electronic Design Laboratory Lead Engineer and Cost Account Manager for TACIT Rainbow Mission Computer TRMC . The TRMC is based upon a MC68030 with dual MC68332s along with two subsystems interface modules and a power supply. Supervised and directed four Electrical Designers.

Participated and provided Technical Engineering Support to System, Concept, Equipment, Readiness and Production Reviews transiting the TRMC Design into a solid Product with the help of Concurrent Manufacturing Engineering.

• Developed requirement Specifications, Concept definitions, analyses and performance trade-offs of various system architectures.
• Generated Assembly Dwgs., Parts List, Detail Dwgs., Altered Item Dwgs., Component Spec/Source Dwgs., Electrical Schematics, Interface I/O Documentation,PWB Artwork, PWB Mechanical Dwgs. as required.
• Built, Serviced and Maintained the TACIT RAINBOW Software Development Facility, integrated prototype H/W along, with SPARC Workstations, IBM-PCs and Silicon Graphics Workstations in the performance of software code development, system simulation and software performance evaluations.
• TRMC 80 Logic in Altera FPGAs
• No PWB Design Errors. Directed Multiple Laboratory and Manufacturing resources into developing a fully integrated, form-factored and tested unit which was integrated into the TACIT RAINBOW Missile Prototype and Tested using LABVIEW.

Digital Design Laboratory Lead Engineer and Cost Account Manager. Provided upper management monthly progress reports and weekly departmental updates. Assigned design tasks and maintained cost and schedule.

• Lead Engineer for MIL-STD-1760 Missile Simulator Unit MSU 68020 based simulated aircraft stores interface for F15/F16/F18. Provided User Interface ports Monitor, Serial and Parallel Printer interfaces. Tested and qualified to MIL-STD-810C 12 units.
• Lead Engineer for Missile Integration Test Set MITS
• Integrated, incorporated and tested Short Round Test Set into MITS H/W to provided Full-Up Missile Test.
• Lead Engineer for Dynamic Software Test Facility DSTF
• for software development designed, developed, integrated and tested a facility based upon five MC68020s, simulated internal missile interfaces via specialization circuitry and utilization of Personal Computers

Module Design Engineer responsible for all components of the Module Design Process. Coordinated and supplied technical design input, integration test and operational inputs for innovative subsystem development.

• Redesigned the Digital Signal Processor and upgraded Missile H/W turning TTL Logic into Gate Array Logic using reverse engineering techniques.
• Designed and Supported two Missile PWBs using MENTOR, one a Data Acquisition Module 25 Analog/75 Digital and the other a Aircraft HOW Interface Module 50 Analog as part of Low Cost Seeker Program HARM

• Designer for Drop Test Seeker DTS Program Zilog Z8002 based
• Integrated Custom 10K Gate Arrays with Micro-Wire Technology using MENTOR and VHDL
• PWB Designer of Pre-Amplifier Module 100 Analog using PSPICE and MENTOR
• Proposal Engineer for US Navy Outer Air Battle Program

Performed and Specified the Electrical Design, Electronic Circuit Prototyping, PWB Layout, Product Documentation, H/W Development, Integration and Testing of a Computerized Newspaper Pagination System for a start-up company. Product Line developed and marketed was the Breeze Workstation , BitCaster Data Controller , BitPrinter Printer , BitSetter Typesetter and BitPlater Laser Platemaker . Involved in all phases of electronic and product design, S/W & H/W integration, test, production implementation, field service and marketing.

• Design/Developed a Raster Image Processor based upon the AMD2903 Bit-slice processor form
• factored on a 12 x 12 multi-layer PWB using inverse euro-connectors.
• Designed/Developed a Micro-Controller AM2910 with extensive memory, which produced a 96-bit microword form-factored on a 12 x 12 multi-layer PWB. Developed unique high-speed clock using PAL Logic. Used Future Net and Multi-wire prototyping.
• Designed/Developed a Dual Port Module on a two-sided PWB using light table, which allowed the i ncorporation of a wide range of Off-the-Shelf Multibus I Modules.

Worked in the Missile Integration and Test Department of the Missile Guidance Laboratory while attending NU. Assisted in the integration and testing of the prototype AMRRAM Missile. Involved in the development of a Missile Readiness Test Set MRTS . Responsibilities included: Creation of overall MRTS System Level Diagrams; Generation of Schematics, Part List and Wire Lists; Assembly Drawings. Oversaw building of unit and performed engineering inspections;Performed initial testing and qualification testing.

Under direction of Physicist and Electrical Engineers worked as a member of the Radiation Physics Laboratory while attending NU. Performed tasks in Prototyping, Development and Testing of various, Satellite Subsystem H/W for GOES Program

Held various jobs while attending college. Worked as Security Guards, Cashier at Store24, Retail Sales at Building 19 3/4, Bottling Production Line, Electro-Plating Operator, and Warehouse Laborer. Had own summertime Painting and Landscape Business.

1981 NORTHEASTERN UNIVERSITY US-MA-BOSTON
Bachelor s Degree BS ENGINEERING TECHNOLOGY
1976 Sylvania Technical School US-MA-Waltham
Certification COMPUTER ELECTRONICS
1974 UNIVERSITY OF MASS US-MA AMHERST
Courses PSYCHOLOGY/CRIMINAL JUSTICE

ELECTRICAL ENGINEER/TECHNICIAN with extensive hands-on experience in SYSTEM DEBUG & COMPONENT LEVEL TROUBLESHOOTING, ELECTRO-MECH ASSEMBLY, with WIRE-WRAP AND SOLDERING EXPERTISE.

Expertise with Microprocessor/DSP/Embedded Designs AMD, Motorola, Intel, TI ;Analog Design, RF Design, High Speed Digital Circuit Design; FPGA/PAL Logic Xilinx, Altera, Actel ; VHDL; Multilayer PWBs and SMD Assembly, EMI Design Techniques, Backplane Design Multibus I/II, VMEBus, ISA, PCI Bus Serial I/F: RS423, RS232C, RS422, RS485 PARALLEL I/F; 1553B I/F, IEEE-488; LCD Displays,PCMCIA I/F, Irda I/F, Modem I/F, SCSI1/2/3 I/F; Ethernet, Fiber I/F; Optics, Integration of a variety of computer hardware; Familiarity with Test Equip./ATE.

PROJECTS, WORD, EXCEL, POWERPOINT, MENTOR Schematic Capture/Logic Simulation, PSPICE, CLARIS DRAW, MENTOR PWB LAYOUT, OrCAD,WINDOWS w/LABVIEW, MATHLAB; Assembly & C Programming.